| |
|
QuarryCast®
is a molded stone with a sandstone/limestone
look that is available in limitless molded shapes
or flat veneer panels in a range of standard earth-tone
colours. Made from natural aggregates and minerals,
and reinforced with glassfibers, QuarryCast®
provides a warm and distinctive appearance similar
to that of natural sandstone/limestone, but the
weight and installation costs will be appreciably
less. |
 |
QuarryCast®
can be molded into any shape and the 5/16”
(8mm) thick ‘veneer’ panels can be
adhered to drywall or plywood. Most stone/marble
colours can be custom matched. Colour, shading
and texture variations within and between individual
pieces will lend an exciting dimension to any
design.
|
|
Photo
image is for reference only, actual colour and texture
may vary.
QuarryCast®may be
customized to meet any architect or designer criteria
for colour or texture, although standard QuarryCast®t
is available in the following colours:
|
| |
|
QuarryCast®
enables architects and designers to incorporate
elements with a natural stone look in their design
of interior spaces.
QuarryCast® with
AG - standard QuarryCast®
material is treated with a factory applied anti-graffiti
coating for areas where staining or spills are
expected. The coating allows for easier cleaning.
All baseboards (skirting) have an applied AG coating.
AG coating is recommended in restaurants, high
traffic areas, etc. Note: The AG coating introduces
a slight gloss to the surface.
QuarryCast®
HI - formulated for greater impact
resistance, it may be used in certain high traffic
areas where this property is deemed desirable.
QuarryCast®
Mottled
- a two-tone specialty texture.
Samples of our standard
QuarryCast®
as well as custom pieces are available.
We have the ability to customize both the colour
and texture of QuarryCast®.
To achieve a custom finish, we require a physical
sample that exemplifies the desired end result.
QuarryCast®
is a pre-finished material, and we strongly recommend
that it be installed by finish carpenters, mill
workers or shop fitters. All cuts are visible
and cannot be filled over; therefore, extreme
care is required for these pre-finished materials.
The material is cut and installed using regular
carpenter’s tools, with fine toothed carbide
or carborundum blades and bits recommended to
achieve cleaner cuts and less wear on tools. QuarryCast®
material is never to be wet cut.
View QuarryCast®
product specs here
In
North America specify QuarryCast®
under Section 6 —
QuarryCast® is for INTERIOR
APPLICATIONS ONLY
|
|
